After exposing my A4 cover i then had to cello tape the yellow area's of the screen to prevent the ink from coming through the other side as well as covering up the other section to my cover. I then placed some spirit into the silver ink to make it slightly more transparent, the gold i wanted wasn't available which had to be create through a powder which the technician had to do.
Holding the squeegee at a 90 degree angle giving the print a
much better outcome.
Before removing the print, slightly lift up the press and run the ink back
to the top to prevent the screen from drying out when preparing the next
print.
Using the masking tape to create registration marks which will allow
the gold screen cover to be more precise
No comments:
Post a Comment